0900 hrs, Sunday, January 17th 2010
QuakeNet 2.1 Roster, Frequencies and Instructions [Revised]
CONTENTS:
1. QuakeNet 2.1 Basics
2. List of Relay Control Operators
3. Roster with Signal Reporting record, attached and below signature line, this message 4. Signal Reporting Instructions, attached and below the Roster 5. Net Control Cell Number (only available on day of QuakeNet)
QUAKENET2.1 BASICS
QuakeNet participants have three actions to complete:
1. Tune in and listen to the Net Instructions at 0900 hrs, Sunday, January 17th 2010 2. Check-in with Net Control when your call sign is heard. Check-in with a Relay Operator ONLY if you could not check-in with Net Control 3. Record the RST of the signals you hear for every one on the roster
At 0900 we start on 146.640 PL 107.2. Net Control is on 146.640 SANDRA Otay for 2m Repeater, PL 107.2 and 146.550 simplex for Roll Call.
At 0910 we switch to 146.550 and only Net Control conducts roll call. Relay Stations monitor and make note of stations that are not heard by net control.
Net Control will monitor 146.640 Otay Repeater PL 107.2 for the duration of the net.
At approximately 0940 control switches to Relay Stations and the Relay Control Operators ask for missed check-ins in roll call order. All participants will have a roster so they can get in line, so to speak, and avoid pile ups. Participants should select the Relay Control that is in their area. Net Control is not taking adds or visitors. You may do so if you feel inclined. I suggest you make any adds or visitors wiat till you finish roll.
We will have a check-in of Relay Operators on the assigned frequencies so the participants can select the relay station that has the best signal for them.
At approximatley 0955 we will go back to 2M repeater and close the net.
LIST OF RELAY CONTROL OPERATORS
147.510 - KI6LAQ, Art Hochberg, Del Mar/Solana Beach CERT
146.565 - KG6VVN, Daniel Musick, Double Peak with KI6RRQ, Rich, and KI6LAV, Georgia
147.555 - KI6GZK, Don Dodson ,San Miguel Fire District,Crest 147.480 - kC6YSO, David Doan, Hillcrest
NET CONTROL
Cell Number 619 852 7894 - Use *82 Please. Usually do not answer calls showing as unknown or restricted.
(only available on day of QuakeNet)
Thank you for participating.
KI6TTF, Joseph, Net Control
QuakeNet@Live.com
Primary objective is to exercise 2M simplex.
Secondary objective is to get the most participation possible from all amateur radio operators Tertiary objective is keep the operation simple so as to encourage everyone to participate - old Hams, New Hams and NBOAs (Never Been On the Air) =========================================
Conducted on behalf of the El Cajon Amateur Radio Club http://www.WA6BGS.org ========================================
QUAKENET 2.1 PREFINAL ROSTER REVISED WITH SIGNAL REPORTING
QuakeNet 2.1 Roll Call Signal Reports
50 51 Circuit Merit S-Meter
Enrolled Q2.1 CM1-CM5 S1 to S9
Roster CALL SUFFIX HANDLE LOCATION Quality Strength
1 E AD6UK UK Nick
1 E K5WFW WFW Len Santee
2 E K6MUY MUY Bill Lemon Grove
3 E K6NUG NUG Sergio Lakeside
4 E K6WD WD Mike National City
5 E K7VP VP Virgil El Cajon
6 E KA6DUH DUH Dennis Escondido
7 E KC6GIL GIL Christy Pt. Loma
8 E KC6QLS QLS Paul El Cajon
9 E KC6YSO YSO David College Area
10 E KG6ZWD ZWD Art La Mesa
11 E KD6VKW VKW John Chula Vista
12 E KE6VUJ VUJ Jim Ranchita
13 E KF6SXZ SXZ Marco El Cajon
14 E KG6VVN VVN Daniel Oceanside
15 E KI6AOK AOK Laura San Marcos
16 E KI6CSY CSY Mickey Elfin Forest
17 E KI6GRN GRN David City Heights
18 E KI6GZK GZK Donald San Miguel FD
19 E KI6LAQ LAQ Art Del Mar
20 E KI6LAV LAV Georgia Double Peak
21 E KI6MBO MBO Doug Bay Terrace
22 E KI6RRN RRN Axel La Mesa
23 E KI6RRQ RRQ Rich San Marcos
24 E KI6SAY SAY Carol Del Mar
25 E KI6SRR SRR Louie Chula Vista
26 E KI6TTF TTF Joseph Net Control
27 E KI6UPY UPY Joseph Net Control
28 E KI6WOF WOF Doug Vista
29 E KI6WVG WVG Connie Tierrasanta
30 E KI6YFH YFH Bruce San Marcos
31 E KI6YFK YFK Joanne San Marcos
32 E KI6YZJ YZJ Omar Lakeside
33 E KI6YZK YZK Maryetta USD
34 E KJ6AWX AWX Beverly Del Mar
35 E KJ6BFS BFS Cheryl Chula Vista
36 E KJ6BFT BFT Margaret Chula Vista
37 E KJ6BSO BSO Carl Lemon Grove
38 E KJ6BWX BWX Tim Balboa Park
39 E N6NKJ NKJ Rich Cal Fire
40 E N6RSL RSL Jim Sunny Side
41 E N6WWC WWC Richard Lakeside
42 E NE6O O James South Bay
43 E W5BN BN Fred Coronado
44 E W5COM COM Tom Spring Valley
45 E W6BTS BTS Dave La Mesa
46 E W6GRK GRK Gary Net Control
47 E W6OTT OTT Mike Oceanside
48 E W6VJT VJT Pat Santee
49 E WB6MNR MNR Angelo La Mesa
50 E WD6FDD FDD Richard Santee
EX KI6LEU LEU Bill Vista
EX Ki6LKP LKP Dave Vista
EX N1QI QI Earl El Cajon
CIRCUIT MERIT SIGNAL REPORTING SYSTEM
The CM ("Circuit Merit") system was devised by HF radiotelephone professionals to better
quantify the average quality of a VOICE signal. The letters "CM" (voiced as "Charlie Mike")
are followed by a figure from 0 to 5 - to indicate the quality of the VOICE. In addition, it can be
followed by the S-meter reading to indicate objective signal strength.
Example: A report of CM4 would be voiced as: "Your signal is Charlie Mike four." If the meter
reading is added (CM4, S9) it becomes: "Your signal is Charlie Mike four, Sierra nine."
The signal is quantified using these criteria:
CM5 - Completely clear, broadcast quality. Each word is fully understood, without any
objectionable interference or noise; on FM, full quieting. Always breaks squelch (*). This
designator is not always earned on FM, and seldom on SSB; as conditions must be superb.
CM4 - Clear with a slight amount of noise and/or interference. Each word is understood.
Always breaks squelch. A common report for solid SSB voice conditions under very good
conditions; the FM equivalent is a slight amount of "white noise" behind the transmission.
CM3 - Static and/or interference is present. Bulk of transmissions are understood without
having to be repeated. Usually breaks squelch. CM3 is generally considered to be at the
margin of acceptable voice communications, particularly when using squelched FM.
CM2 – The noise level very close to signal level. Static and / or interference very
prevalent; words are missed, retransmissions are necessary. Won't break squelch reliably.
CM2 is not considered not acceptable or reliable.
CM1 – A signal is barely evident and words are unintelligible. You can tell that someone
is "there" but will not break squelch. CM1 is deemed unusable for voice communications.
CM0 - Absolutely no signal is detectable.
(*) - Used for FM communications only, unless your SSB radio uses a syllabic-derived
squelch such as SINAD.
------------------------------------
Yahoo! Groups Links
http://groups.yahoo.com/group/SanDiegoEmComms/
