Business freq search using FCC geosearch or lat long

This is the place to discuss generalized scanner questions and information for San Diego County. Whether it's radios, antennas, or other general scanner related topics, you can talk about it here.
Post Reply
User avatar
mike
Posts: 647
Joined: Tue Feb 08, 2005 1:34 am

Business freq search using FCC geosearch or lat long

Post by mike »

What would be the easiest way for someone to search for a business or company frequency whether they are on an ltr system trunked or motorola or a conventional system with a location search?
Brian
Posts: 1459
Joined: Thu Oct 21, 2004 8:54 pm

Re: Business freq search using FCC geosearch or lat long

Post by Brian »

Use this page and the 'Point Radius' with Latitude/Longitude search.
http://fjallfoss.fcc.gov/General_Menu_R ... _select=on
User avatar
mike
Posts: 647
Joined: Tue Feb 08, 2005 1:34 am

Re: Business freq search using FCC geosearch or lat long

Post by mike »

Should I set point radius to 1 km to start and from there set it to 0.5 mile radius?
Brian
Posts: 1459
Joined: Thu Oct 21, 2004 8:54 pm

Re: Business freq search using FCC geosearch or lat long

Post by Brian »

Start with small radius and up the radius search to cover larger area.
User avatar
mike
Posts: 647
Joined: Tue Feb 08, 2005 1:34 am

Re: Business freq search using FCC geosearch or lat long

Post by mike »

If you do a search after typing the lat long of an address of a business and do a radius search say up to 12 miles from there and you find an LTR system would they be on that possibly?
Post Reply