need help with SDPD southern
need help with SDPD southern
im new to scanning and I wanted to know how to get the southern division of the SDPD which says 001296 but when I put that in it just says error...help?
To make you life easier on you! You should get the software program.
Butel software makes most of the programs for all the scanners out there!
http://butel.nl/products/arc433/arc433.html
El Cajon CHP is on the RCS County system on a DIGITAL talkgroup.
San Diego CHP 39.400
OceanSide CHP is on 39.800
If you go back to the RCS page.
You would need to input the SOUTHZONE control freqs in and set the scanner to Motorola Mode (read the Manual) and set each freq to MOT not FM.
For San Diego City system
http://www.radioreference.com/apps/db/?sid=330
Butel software makes most of the programs for all the scanners out there!
http://butel.nl/products/arc433/arc433.html
El Cajon CHP is on the RCS County system on a DIGITAL talkgroup.
San Diego CHP 39.400
OceanSide CHP is on 39.800
If you go back to the RCS page.
You would need to input the SOUTHZONE control freqs in and set the scanner to Motorola Mode (read the Manual) and set each freq to MOT not FM.
For San Diego City system
http://www.radioreference.com/apps/db/?sid=330
Last edited by Brian on Thu Dec 20, 2007 10:33 am, edited 1 time in total.
I think you're confused on something. 1296 (you can forget about the leading zeros.) is a TALKGROUP ID. The frequencies (8xx.xxx) are different. You put in all of the frequencies of the system into the scanner and that is called "setting up the trunk system". After that, you have to enter the TALKGROUP ID's into that system. I don't use any Radio Shack scanners and they're a bit different than Uniden, so I won't comment on how to do it, but others may.Greg88 wrote:im putting all the southern frequencies, but my question is how to put the decimals for like the SDPD southern and all those
Reading your question and choice of words leads me to believe you're trying to put 0001296 in as a FREQUENCY. I think this is where you're going wrong.
Can someone give the basic steps for prgging up his RS scanner?
There are no Southern FREQUENCIES. There is ONE talkgroup ID (1296). The FREQUENCIES are shared among all users of the system. I think we're stuck with a terminology issue here. Read post above post.Greg88 wrote:im putting all the southern frequencies, but my question is how to put the decimals for like the SDPD southern and all those