I would like to know what you guys have setting wise for the AGC. I know how to set them, but I cant seem to get it right.
The systems that I care to be optimal is RCS with City TRS. For me it seems that Digital is quiet compaired to analog on both systems.
Scanner: BCD996T
Firmware: 3.02.00
If you could share your setting, it will be much appreciated
Digital AGC
-------------------
Response Time:
Refer Gain:
-------------------
Analog AGC
-------------------
Response Time:
Refer Gain:
Gain Range:
-------------------
P-25 Wait Time:
Hold Time [RCS]:
Delay Time [RCS]:
Hold Time [City TRS]:
Delay Time [City TRS]:
-------------------------------------------------------------------
On a side question. There are two repeaters in IB right behind Station 70, If I recall correctly they were cell phone repeaters. As I drive next to them it kills my scanner from receiving (From the power output of the repeater correct?) Would it effect the RCS Users around the repeaters also?
Thanks
-Mark
Auto Gain Control
Re: Auto Gain Control
Here are the settings for my 396. I'm not completely happy but I haven't made any changes for a while.
Digital AGC
-------------------
Response Time: -7
Refer Gain: +5
-------------------
Analog AGC
-------------------
Response Time: -2
Refer Gain: +2
Gain Range: 11
-------------------
P-25 Wait Time: 500ms
Hold Time [RCS]: 0
Delay Time [RCS]: 1
Hold Time [City TRS]: 0
Delay Time [City TRS]: 1
Digital AGC
-------------------
Response Time: -7
Refer Gain: +5
-------------------
Analog AGC
-------------------
Response Time: -2
Refer Gain: +2
Gain Range: 11
-------------------
P-25 Wait Time: 500ms
Hold Time [RCS]: 0
Delay Time [RCS]: 1
Hold Time [City TRS]: 0
Delay Time [City TRS]: 1
Re: Auto Gain Control
Thank you, Ill give it a go.
Re: Auto Gain Control
Mark -IronCross wrote: -------------------------------------------------------------------
On a side question. There are two repeaters in IB right behind Station 70, If I recall correctly they were cell phone repeaters. As I drive next to them it kills my scanner from receiving (From the power output of the repeater correct?) Would it effect the RCS Users around the repeaters also?
Thanks
-Mark
I'm not aware of any particular issues at or around Station 70.
Yes, cell sites [especially AT&T and Nextel] impact RCS user reception of the system on the street. As (if?) rebanding progresses, the situation will get better as frequency separation between the two is increased.
Don