996/396 Firmware.
Posted: Wed Nov 05, 2008 2:26 pm
It seems like they got it right.
My P25 sound good, and the ACG works like a charm.
http://www.uniden.com/my/ Version 3.1 is working great, remember to back up before you do it. To get the updates you must register your scanner then goto my scanners to get the updates.
I suggest you update.
This firmware applies the following changes from V3.00.00:
Restored autotracking of Motorola 800 Standard systems in Control Channel Search mode.
P25 test mode setting defaults to 3 for best decoding performance.
Communications will no longer be locked up between the scanner and the remote head if AGC settings are accessed.
Fixed the CSC command to no longer return to the menu after CSC,OFF is received.
Fixed the CSC command to properly report out all RSSI levels for all frequencies.
Scanner no longer resumes scanning after pressing "." then the first digit of a SQK
If backlight is set to infinite, it will no longer turn off after receiving a Close Call hit. (BCD396T Only)
Whats changed from V1.11.03 to V3.00.00: http://www.uniden.com/files/BCD396T_V3_ ... mation.pdf
Post back...
My P25 sound good, and the ACG works like a charm.
http://www.uniden.com/my/ Version 3.1 is working great, remember to back up before you do it. To get the updates you must register your scanner then goto my scanners to get the updates.
I suggest you update.
This firmware applies the following changes from V3.00.00:
Restored autotracking of Motorola 800 Standard systems in Control Channel Search mode.
P25 test mode setting defaults to 3 for best decoding performance.
Communications will no longer be locked up between the scanner and the remote head if AGC settings are accessed.
Fixed the CSC command to no longer return to the menu after CSC,OFF is received.
Fixed the CSC command to properly report out all RSSI levels for all frequencies.
Scanner no longer resumes scanning after pressing "." then the first digit of a SQK
If backlight is set to infinite, it will no longer turn off after receiving a Close Call hit. (BCD396T Only)
Whats changed from V1.11.03 to V3.00.00: http://www.uniden.com/files/BCD396T_V3_ ... mation.pdf
Post back...